In this article
If you are building an ADU in California, you will hear the term Title 24 early and often. It sounds technical, and the forms that go with it are. The ideas behind it are straightforward, and understanding them helps you make better design decisions and avoid surprises during permitting.
If the ADU is in California, Title 24 is part of the design, for a detached ADU, an attached ADU, or a garage conversion. The energy forms follow the floor plan you choose.
This article explains what Title 24 is, what it checks on an ADU, and how design choices affect it. It is a homeowner overview, not a substitute for the energy analysis your project needs.
What Title 24 is
Title 24 is the part of California's regulations that contains the building codes. When people say "Title 24" on a residential project, they usually mean Part 6, the Building Energy Efficiency Standards. These standards set minimum energy performance for new buildings, additions, and many alterations. They are updated every three years.
For an ADU, Title 24 compliance is shown through calculations and forms prepared for the permit. They describe the insulation, windows, heating and cooling system, water heating, ventilation, and in many cases solar panels. The forms are printed on the permit drawings, and the city checks them during plan review.
Climate zones
California is divided into 16 building climate zones. A coastal zone in San Diego and a hot inland zone in the Central Valley have very different requirements for insulation, window performance, and cooling. Your ADU's requirements depend on the climate zone of your address, which is one reason the same plan can need different specifications in different cities.
Two ways to comply
There are two main paths to show compliance:
- Prescriptive: the project meets a list of specific requirements for each component, such as minimum insulation values and maximum window performance values. It is simpler but less flexible.
- Performance: software models the ADU's expected energy use and compares it to a standard design. You can trade off between components, for example better windows in exchange for a different wall assembly. Most new ADUs use this path because it allows more design freedom.
Solar panels
Newly constructed detached ADUs in California generally must include solar panels sized to the unit, with some exceptions such as heavy shading or very small roof areas. Garage conversions and many attached ADUs are treated as additions or alterations and usually do not have the same solar requirement. The details depend on your project and the current code, so confirm them with your energy consultant early.
This matters for design. A roof with a large, unshaded surface facing south or west makes solar easier. A complex roof with many small planes can make it difficult.
Heating, cooling, and water heating
Recent versions of the energy code strongly favor electric heat pumps for space heating and water heating. Many new ADUs use a ductless mini-split system for heating and cooling and a heat pump water heater. These systems are efficient, work well in small spaces, and avoid running a new gas line to the unit.
The choice of system affects the layout too. A heat pump water heater needs space and ventilation, and a ducted system needs room for ducts in the ceiling or attic.
Windows and the building envelope
The building envelope is everything that separates inside from outside: walls, roof, floor, windows, and doors. Title 24 looks at how much heat each part lets through.
- Insulation: required levels for walls, roofs, and raised floors depend on the climate zone.
- Windows: rated by U-factor (heat loss) and solar heat gain coefficient (heat from sunlight). Higher-performing glazing may allow greater window area under a compliant energy design.
- Window area: a large amount of glass, especially facing west, can make compliance harder or require upgrades elsewhere.
- Air sealing: how tightly the unit is built, which may be tested in some cases.
I explain how window placement affects comfort and light in Where to Put the Windows: Daylight, Views, and Privacy in a New Home.
Field verification during construction
Some Title 24 measures must be checked on site by a certified third party called a HERS rater. Depending on the project, that can include testing duct leakage, verifying the heat pump installation, checking insulation quality, or confirming ventilation airflow. These checks happen during and after construction, and the city usually needs the results before the final inspection.
Your builder should know which verifications apply, because some must happen before walls are closed.
Design choices that make compliance easier
- A compact, simple building form with fewer corners.
- Glass concentrated where views and daylight matter, with shading on west and south sides.
- Roof overhangs or covered porches that block high summer sun.
- An all-electric system with a heat pump and a heat pump water heater.
- A roof area with good solar exposure, if solar is required.
Title 24 checks your ADU's insulation, windows, equipment, and often solar. When energy compliance is part of design from the beginning, it supports the design instead of fighting it.
Need a permit-ready ADU set in California?
My ADU packages include architectural and MEP drawings and Title 24 energy compliance, coordinated with the design from the start. See your fee in minutes.
Arch Design by B, LLC
See Your Home Before It’s Built.